Hello Josafat
> -----Original Message-----
> From: Hugh Irvine [mailto:[EMAIL PROTECTED]]
> Sent: den 12 oktober 1999 08:06
> To: Josafat Timotius
> Cc: [EMAIL PROTECTED]
> Subject: Re: (RADIATOR) Remote Annex 6300
>
>
>
> Hello Josafat -
>
> On Tue, 12 Oct 1999, Josafat Timotius wrote:
> > Hi Hugh ,
> >
<snip>
> > I had try my TotalControl with radiator, and everything
> work fine, when a
> > user online, it show up in RADONLINE with right FRAMEDIPADDRESS
> > informastion, and when i disconnect, the ACCOUNTING table
> got the stop
> > session log correctly, including the right FRAMEDIPADDRES.
> > Then i try my annex to accounting to radiator, the problem is :
> > - when connected, my session show up in RADONLINE but with
> the blank
> > FRAMEDIPADDRESS
> > - when i disconenct my session, the accounting log show
> up, but with the
> > FRAMEDIPADDRESS column blank.
>
> I think the first thing to do is run Radiator with a debug
> trace level 4 and
> look at the packet dumps to see exactly what is coming in
> from the NAS. Once we
> know what attributes are in the packets, we can decide how
> best to deal with
> the data. Note that if the NAS does not send
> Framed-IP-Address there is nothing
> to be done.
>
Cisco, for one, doesn't send the IP address in the acct-start packet, you need to
configure it to send updates, and then use the first "Alive" packet (which comes very
soon after the start packet )
/Ingvar
===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
