Hi Josafat,
> Thank you Ingvar,
>
> Does any one know how to do it with Remote Annex 6300 ?
I have just looked at accounting data produced by an RA6300 running
X14.2.25, and Framed-IP-Address is present in both the Start and the Stop
records when the annex setting 'radius_acct_level' is set to 'standard'. I
assume you are using the port in auto_adapt mode, and that the user is not
logging in with a CLI first?
Which version of software are you running on the 6300? If using -trace 4
shows that you're not receiving Framed-IP-Address, and you are running pre
X14.2.20 software you should upgrade to X14.2.25. You can download X5.4.25
(14.2.25) from ftp://ftp-support.baynetworks.com/outgoing/RA/X5.4.25.tar.Z
Regards,
Andrew Foster
=============================================
Andrew Foster Tel: 1800 064 008
Nortel Networks Fax: (02) 9927-8811
Customer Network Engineer
Asia Pacific TSC
===
Archive at http://www.thesite.com.au/~radiator/
To unsubscribe, email '[EMAIL PROTECTED]' with
'unsubscribe radiator' in the body of the message.
