POMdev wrote: > This happened to 6 of my 7 radios last year as the neighbors upgraded > their wireless systems. The (mostly) unaffected radio was in the > basement, where the neighbors' signal levels were much lower than on the > above ground floors. Apparently, the radio's wireless system is being > disrupted by wifi-6 transmissions, even at pretty low signal levels, > even on different channels. The radio periodically scans all the 2.5 gHz > channels, and it "chokes" on some wifi-6 signals. The effort to fix this > issue is being discussed here on this and the > 'Community-Build-Radio-Firmware' > (https://forums.slimdevices.com/showthread.php?111663-Community-Build-Radio-Firmware) > threads starting 'here' > (https://forums.slimdevices.com/showthread.php?111663-Community-Build-Radio-Firmware&p=982295&viewfull=1#post982295). > Until the issue has been resolved, you might try the 'mitigation script' > (https://github.com/PomDev2/wlanpoke) on GitHub, although it requires a > non-trivial manual install via ssh, etc.
Thanks, I haven't noticed any new signals coming from our neighbors, but unfortunately it could be anything. I'll check this out over the weekend, the manual is pretty daunting and the challenge of getting this onto one of the radios when it frequently loses its IP connection will be another joy ------------------------------------------------------------------------ stoobie-doo's Profile: http://forums.slimdevices.com/member.php?userid=2192 View this thread: http://forums.slimdevices.com/showthread.php?t=109953 _______________________________________________ Radio mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/radio
