Well, DUH, I guess - I'll have to put myself on the pledges list! thanks! Sami
----- Original Message ----- From: "Dave" <[EMAIL PROTECTED]> To: "RBASE-L Mailing List" <[EMAIL PROTECTED]> Sent: Friday, January 31, 2003 3:24 PM Subject: [RBASE-L] - Re: Printing on multi-part > Dear Sami > > Yes, and any paper advance buttons on the printer (e.g. the advance to > tear-off on an Epson dot matrix) will work to the custom length (For example > I have to print on the 5" long NCR forms on perforated continous paper) > > Regards David > > > Dave - > > > > So by doing this you are able to prevent the default formfeed to the > > standard 8.5 x 11 page bottom? > > > > Sami > > > > > > > Although not a very experienced programmer, I personally use RBWin 6.5++ > > to > > > print on a variety of muti-part dot matrix papers with Windows fonts. > > > > > > With windows, for most dot matrix printer drivers there is a "custom" > > option > > > under properties:paper where you can define specific paper length and > > wide. > > > > > > Although the current version of R:Base does not include an option in > > > PRNSETUP for such non standard paper sizes (Please correct me if I'm > > wrong), > > > I simply create a copy of the printer driver with the custom page size > set > > > as default, then by only using PRNSETUP 'printer name' the default > custom > > > paper size is used. > > > >
