One area to check is:
Local area connection
General tab
(Speed should say 100Mbps or higher. This is not actual, just the
nominal setting)
Then Properties
Configure for the NIC card
Advanced tab
Click on Speed & Duplex
Normally this is set to Auto, but make sure the slow PC is set the
same as the others. (should be the same except in the case of
significantly different hardware.)
You can always copy and time a large file between the server on a fast
PC and then the slow one. If a difference is seen here, then it is
definitely not Rbase related. Does not fix the problem, but at least
reduces the pool of unknowns.
Bob Thompson
LaPorte, IN
219-363-7441
Sent from my iPod
On Nov 8, 2010, at 4:45 PM, [email protected] wrote:
Client is running 7.6 windows, will be seeing them
tomorrow. They are claiming that one workstation
is running slow. All others are running fine. Is there
a list of things that should be checked in addition to
the normal differences in CPU speed, memory size,
operating system.... They all run a common startup
routine for database and temp settings.
Thanks a bunch!
Karen
