This sounds like you are working with an OLD CFG file from a previous version or one created by copying an older version.
Have you tried uninstalling R:Base 7.1 and installing all over again? David Blocker [EMAIL PROTECTED] 781-784-1919 Fax: 781-784-1860 Cell: 339-206-0261 ----- Original Message ----- From: "John Docherty" <[EMAIL PROTECTED]> To: "RBG7-L Mailing List" <[EMAIL PROTECTED]> Sent: Friday, October 15, 2004 2:49 PM Subject: [RBG7-L] - RE: Another Issue with RBENGINE.CFG > Razzak, > > Thanks for your reply. Using Rbase on my laptop (no network) I have deleted > all the rbengine.cfg files, and find that Rbase starts without any errors, > repeatedly. However as soon as I check the WALKMENU box and save the > settings I get the following errors on startup:- > > Invalid RBENGINE.CFG command: MENU BLACK ON GRAY > Unrecognized command - retype it (40) > > If I go back to the settings I get the same error messages reported in my > previous email, ie. > > -ERROR- Illegal date format specification ( 206) > -ERROR- Syntax is incorrect for the command SET (2045) > -ERROR- Syntax is incorrect for the command SET (2045) > -ERROR- Value must be ON or OFF for AUTOSKIP ( 645) > -ERROR- Syntax is incorrect for the command SET (2045) > -ERROR- Syntax is incorrect for the command SET (2045) > -ERROR- Syntax is incorrect for the command SET (2045) > -ERROR- Value must be ON or OFF for SORTMENU ( 645) > -ERROR- Value must be ON or OFF for WALKMENU ( 645) > -ERROR- Syntax is incorrect for the command SET (2045) > > These occur before the dialog appears asking if I want to save the changes. > > I have tried the -a switch as suggested by Albert Berry, but the problem > still occurs. > > Regards, > > John Docherty > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of A. Razzak > Memon > Sent: Friday, October 15, 2004 5:11 PM > To: RBG7-L Mailing List > Subject: [RBG7-L] - RE: Another Issue with RBENGINE.CFG > > > John, > > You may have to search for those files on your network > drives as well. > > Once renamed or deleted, start RBG7 and let the RBG7 > startup routine create one for you. > > Hope that helps! > > Very Best R:egards, > > Razzak. > > > At 11:05 AM 10/15/2004 +1300, John Docherty wrote: > > >Razzak, > > > >I have also encountered problems with errors such as this, and have deleted > >all RBENGINE.CFG files from my PC on a number of occasions. > > > >After going to the settings dialog I receive errors including > > > >206 - illegal date format > >2045 - format is incorrect for the command SET > >645 - value must be ON or OFF for AUTOSKIP > >Ditto for SORTMENU and WALKMENU > > > >Can you please advise what I need to do here. > > > >Also, should rbase.dat be run when RBASE starts up, as it used to be ? > > > >I am using build 7.1.78.30916 > > > >Thank you. > > > >Regards, > > > >John Docherty > >-----Original Message----- > >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of A. Razzak > >Memon > >Sent: Friday, 24 September 2004 7:06 a.m. > >To: RBG7-L Mailing List > >Subject: [RBG7-L] - Re: Issue with RBENGINE.CFG > > > > > >J.M., > > > >01. Search for all RBENGINE.CFG files in path. > > > >02. Either rename or delete the ones found. > > > >03. Start RBG7.1 (Update 77 or higher ...) > > > > That will create a fresh RBENGINE.CFG > > > >That's all there is to it! > > > >Have fun! > > > >Very Best R:egards, > > > >Razzak. > > > > > >At 11:42 AM 9/23/2004 -0400, J.M. Gratias wrote: > > > > >One of my client reports the following issue : > > > > > >When RBWIN 7.0 (update 77) is run, a message display : > > > > > >RBENGINE.CFG invalid command MENU BLACK ON RED > > > > > >File RBEGINE.CFG is located in C:\WINDOWS directory. > > >It contains : > > >... > > >COLOR GRAY ON BLACK > > >MENU BLACK ON RED > > >DIALOG BLACK ON CYAN > > >FIRST RED ON GRAY > > >.... > > > > > >I tryed to change MENU colors : same problem > > >The only way to delete this message is to comment MENU colors setting > > > > > >;MENU BLACK ON RED > > > > > >After clicking OK, everything seems normal. > > > > > >Any idea about what is wrong in this setting ? > > > > > >I did'nt found any duplicated RBENGINE.CFG files in others directories. > > > > > >Using XP Pro SP1 > > >Client say that he had the same issue before upgrading from 72 to 77. > > > >-- > >Incoming mail is certified Virus Free. > >Checked by AVG Anti-Virus (http://www.grisoft.com). > >Version: 7.0.280 / Virus Database: 264.10.3 - Release Date: 12/10/2004 > > > > > >-- > >Outgoing mail is certified Virus Free. > >Checked by AVG Anti-Virus (http://www.grisoft.com). > >Version: 7.0.280 / Virus Database: 264.11.0 - Release Date: 14/10/2004 > > > > -- > Incoming mail is certified Virus Free. > Checked by AVG Anti-Virus (http://www.grisoft.com). > Version: 7.0.280 / Virus Database: 264.11.0 - Release Date: 14/10/2004 > > > -- > Outgoing mail is certified Virus Free. > Checked by AVG Anti-Virus (http://www.grisoft.com). > Version: 7.0.280 / Virus Database: 264.11.0 - Release Date: 10/14/2004 > > >
