I recently had my Bleriot fit mapped at Gravel and Grind by way of what is called an xy axis fit.
It was then transfered tomy Rambouillet. The seat height and reach and bar height are different than the Bleriot if you measure with a tape measure. But the fit is the same in relation to the xy axis on the two bikes. I am not sure what that is. I think it is the relation of saddle to bb and bars to floor. Not sure. But I was told that trying to replicate one bikes fit by simply measuring the dimensions with a tape will not really get you the same fit because the tube angles and dimensions are different. I had (by way of tape measure when I first did it at home) the fit the same in space, but it put everything up and forward on the Rambouillet. Though all the reach and fore and aft and bar height and seat height measurements were the same as the Bleriot on a tape measure. The xy fit is done with lasers and I think measures the fit relative to bb. Anyway. The fit probs I was having on the Rambouillet are now gone and the bike is now just as comfortable as the Bleriot to ride. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
