If you’re not into the whole match-matchy thing, a rounded out lefthand crank arm can be replaced with pretty much anything, so long as it’s the same length as the one on the drive side.
--Eric Norris campyonly...@me.com @CampyOnlyguy (Twitter/Instagram) > On Oct 24, 2017, at 2:52 AM, Joe Bernard <joerem...@gmail.com> wrote: > > Unfortunately I think you rounded the spindle hole the first time the arm > came loose. Now it's sitting on the spindle with a not entirely uniform > friction fit, which causes it to gradually wiggle itself loose, then the > rounding continues. Maybe someone here has a stray left Sugino arm hanging > around? > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at https://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.