One more note, the 1x seems touchy to snow and mud in the derailure, more so than I recall when my Hunqapillar was 2x9 speed. This could be do to any combination of: 1. not remembering well, 2. 1x11's in general due to tight tolerances or, 3. longer chain stays.
With abandon, Patrick On Sunday, March 22, 2020 at 12:11:56 PM UTC-6, Deacon Patrick wrote: > > My Gus Boots Wilsen is 1x11, shimano whatever groupset, as built by Riv, > playing with various set ups. Zero problems as far as I can tell with the > long chain stays and the 1x. I still would prefer friction shifting, but > that's me and my fixed gear preference talking. Grin. My tendency is to > shift 2-4 gears at a go, so I ride it more like a wide-rage 5 speed. > > With abandon, > Patrick > > On Sunday, March 22, 2020 at 10:15:58 AM UTC-6, Lithocarpus wrote: >> >> I’m considering setting up my MIT Atlantis with a 1x system and was >> interested to know if anyone here has done this, what components you used, >> and if the chain stay length caused any complications. So far, I’m >> considering a 11x50 SunRace cassette, SRAM eagle GX derailleur, chain, and >> trigger shifter, but am hoping to use my existing Silver crankset. It’s a >> triple, but I think the middle chainring position would be aligned >> correctly. If that crank works, I’d likely throw a guard on it. Long term, >> I’m interested in a White Industries crankset, but that’s further down the >> road. >> >> What are your experiences ? Attached image of the current set up. >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/1568ef08-5dca-4ab1-b05b-545ef3550b19%40googlegroups.com.
