Not all riders of Rivendells ride with our handlebars even with the saddle. I 
took advantage of that option for a couple of years, but then I came to realize 
that lower bars were better for me, and the even bars are not actually an 
advantage. I am tall with long arms, so that factors in.

-Jim W. 


On Sep 26, 2010, at 6:59 PM, Rocky B wrote:

> I ride with my knees very slightly bent at 6 o'clock too...i think
> you're fine.
> 
> I bet the kid is probably not used to seeing handlebars even or
> slightly higher than the saddle and so he thinks your saddle is too
> low.
> 
> On Sep 26, 8:29 pm, GeorgeS <[email protected]> wrote:
>> I rode my club's century today and as I was toiling up a hill, a young
>> triathlete sort on a plastic thing (the tubes were not even round!)
>> came by me and he said "Sir, you might want to raise your seat a bit
>> so you'll get more leverage."  Unsolicited advice is so cool.  My
>> immediate thought was to tell him that I had been riding bikes since
>> before he was born, but I've been trying to keep my mouth out of gear
>> so I didn't say anything.  But then I started thinking that back in
>> the day, the rule of thumb, at least as it was passed down to me, was
>> that when the pedal is in the 6 o'clock position, the knee should be
>> very slightly bent.  I've been doing that with every bike I've set up
>> for lo these many years.  Was that wrong?  Has there been any progress
>> in thinking on this subject?
>> GeorgeS
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "RBW Owners Bunch" group.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email to 
> [email protected].
> For more options, visit this group at 
> http://groups.google.com/group/rbw-owners-bunch?hl=en.
> 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en.

Reply via email to