So the Nitto racks have 1 hole, not ? Wierd. I this the page I linked has an adaptor for that too.
Jay On Mar 17, 2:41 pm, EricP <ericpl...@aol.com> wrote: > Planet bike makes a bracket to mount on racks. Put a bolt through one of > the middle holes, and tighten it down with a nylock nut and washer on the > inside of the rack. It's this part -http://ecom1.planetbike.com/3108.html > Pretty sure most lights from Planet bike come with that bracket. Otherwise > your LBS might have one around to sell. It will also fit lights from > Portland Design Works and probably a number of other makers. > > Was also able to mount a Supernova E3 tail light to the Nitto on my Sam > Hillborne by just using one bolt and having the light offset. > > Otherwise it gets to be more of a hassle to get a light mounted on the > rack. Although it can be done. > > Eric Platt > St. Paul, MN > > > > > > > > On Friday, March 16, 2012 10:11:54 PM UTC-5, Anne Paulson wrote: > > Probably some of you have those Nitto racks Rivendell sells. Great > > racks. Front and rear both have a flat plate, with a hole facing > > forward/backward, for (I assume) mounting a light. > > > Can anyone name a front light (dyno-powered or battery-powered) or a > > rear battery-powered light that I could buy that comes with hardware > > suitable for mounting on a flat plate like the Nitto has? I'm > > mechanically challenged and can't figure out how to mount a light on > > one of those racks. Except an IQ Cyo, which I think will soon grace my > > touring bike. But that leaves rear lights or blinkies for my bike and > > my son's beautiful apple green Rambouillet. > > > -- > > -- Anne Paulson > > > My hovercraft is full of eels -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.