Edelux mounted to the front: http://www.flickr.com/photos/45758191@N04/6981340279/in/photostream
I got the mount when I got the Edelux from Peter White. I run my bright rear blinkies on the seatstays. But I also have a knog on the seattube, a blinky on my helmet and enough reflective clothing to handle the rest of project conspicuity. On Saturday, March 17, 2012 9:26:22 AM UTC-7, JimD wrote: > > > word (1) - Duct Tape > > word (2) - Zip Ties > > Perfect fastener enhancers for Fine Rivendell Bikes! > > ;>) > -JimD > > On Mar 17, 2012, at 9:02 AM, PATRICK MOORE wrote: > > > A warning: I've had two rear blinkies mounted on one of those adaptors > > fling themselves off the mount, hit the ground and explode after the > > rear tire hit admittedly egregiously large (6" wide, 3" deep) > > expansion cracks at 15+ mph. It seems that the moment or leverage of > > the very rearward location makes that adaptor rather insecure. > > > > > > > > On Sat, Mar 17, 2012 at 9:51 AM, Peter Morgano <[email protected]> > wrote: > >> Hmm I prefer the Gino Mount to the nitto one, it is a little fatter and > >> mounts through the mount rather than from the back like the nitto > version. > >> Got mine on Amazon for 15 bucks. The front part of my rack is occupied > by > >> the platrack. > >> > >> On Mar 17, 2012 11:38 AM, "Lisa" <[email protected]> wrote: > >>> > >>> Hi Anne, > >>> > >>> I have the Nitto Big front rack with a flat plate as you describe. I > use > >>> the plate to mount a reflector -- I don't like having a light that far > >>> forward. > >>> > >>> My headlight is a Planet Bike Blaze 2W, designed to clamp on a > handlebar. > >>> To mount my light on the rack, I use a Velo Orange small-diameter band > >>> clamp and a Nitto Lamp holder (link below) to create a place to clamp > the > >>> handlebar mount. This puts the light on the side of my rack in a good > place > >>> that doesn't interfere with low-mount panniers, an Ortlieb handlebar > bag, or > >>> even a Wald basket on the rack platform. > >>> > >>> Photo of my bike with the light mounted on the rack (look in front, > just > >>> below the basket): > >>> http://tinyurl.com/7q2lt3q > >>> > >>> Nitto Lamp holder link: > >>> http://tinyurl.com/72z7qca > >>> > >>> Lisa > >>> > >>> On Friday, March 16, 2012 11:11:54 PM UTC-4, Anne Paulson wrote: > >>>> > >>>> Probably some of you have those Nitto racks Rivendell sells. Great > >>>> racks. Front and rear both have a flat plate, with a hole facing > >>>> forward/backward, for (I assume) mounting a light. > >>>> > >>>> Can anyone name a front light (dyno-powered or battery-powered) or a > >>>> rear battery-powered light that I could buy that comes with hardware > >>>> suitable for mounting on a flat plate like the Nitto has? I'm > >>>> mechanically challenged and can't figure out how to mount a light on > >>>> one of those racks. Except an IQ Cyo, which I think will soon grace my > >>>> touring bike. But that leaves rear lights or blinkies for my bike and > >>>> my son's beautiful apple green Rambouillet. > >>>> > >>>> -- > >>>> -- Anne Paulson > >>>> > >>>> My hovercraft is full of eels > >>> > >>> -- > >>> You received this message because you are subscribed to the Google > Groups > >>> "RBW Owners Bunch" group. > >>> To view this discussion on the web visit > >>> https://groups.google.com/d/msg/rbw-owners-bunch/-/uVKOQoI8F7MJ. > >>> To post to this group, send email to [email protected] > . > >>> To unsubscribe from this group, send email to > >>> [email protected]. > >>> For more options, visit this group at > >>> http://groups.google.com/group/rbw-owners-bunch?hl=en. > >> > >> -- > >> You received this message because you are subscribed to the Google > Groups > >> "RBW Owners Bunch" group. > >> To post to this group, send email to [email protected]. > >> To unsubscribe from this group, send email to > >> [email protected]. > >> For more options, visit this group at > >> http://groups.google.com/group/rbw-owners-bunch?hl=en. > > > > > > > > -- > > Patrick Moore > > Albuquerque, NM > > For professional resumes, contact > > Patrick Moore, ACRW > > http://resumespecialties.com/index.html > > > > -- > > You received this message because you are subscribed to the Google > Groups "RBW Owners Bunch" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > [email protected]. > > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To view this discussion on the web visit https://groups.google.com/d/msg/rbw-owners-bunch/-/F2SRJpRO2_IJ. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
