I got my planet bike bracket for my rear blinked from amazon.  Its been 
solid for me...and I've been pounding the crap out of it on my daily 
commute.
 
Jim in Boulder
On Saturday, March 17, 2012 6:41:16 AM UTC-6, EricP wrote:

> Planet bike makes a bracket to mount on racks.  Put a bolt through one of 
> the middle holes, and tighten it down with a nylock nut and washer on the 
> inside of the rack.  It's this part - 
> http://ecom1.planetbike.com/3108.html  Pretty sure most lights from 
> Planet bike come with that bracket.  Otherwise your LBS might have one 
> around to sell.  It will also fit lights from Portland Design Works and 
> probably a number of other makers.
>  
> Was also able to mount a Supernova E3 tail light to the Nitto on my Sam 
> Hillborne by just using one bolt and having the light offset.  
>  
> Otherwise it gets to be more of a hassle to get a light mounted on the 
> rack.  Although it can be done.
>  
> Eric Platt
> St. Paul, MN
>
> On Friday, March 16, 2012 10:11:54 PM UTC-5, Anne Paulson wrote:
>
>> Probably some of you have those Nitto racks Rivendell sells. Great
>> racks. Front and rear both have a flat plate, with a hole facing
>> forward/backward, for (I assume) mounting a light. 
>>
>> Can anyone name a front light (dyno-powered or battery-powered) or a
>> rear battery-powered light that I could buy that comes with hardware
>> suitable for mounting on a flat plate like the Nitto has? I'm
>> mechanically challenged and can't figure out how to mount a light on
>> one of those racks. Except an IQ Cyo, which I think will soon grace my
>> touring bike. But that leaves rear lights or blinkies for my bike and
>> my son's beautiful apple green Rambouillet. 
>>
>> -- 
>> -- Anne Paulson 
>>
>> My hovercraft is full of eels
>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To view this discussion on the web visit 
https://groups.google.com/d/msg/rbw-owners-bunch/-/VTXZmtpqOCgJ.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/rbw-owners-bunch?hl=en.

Reply via email to