My new Saluki came with a classy, classic Specialized crank. But I kept hearing a little clicking noise when in the big ring. Eventually I figured out that the crank arm was just grazing the edge of the (Campy Triple) FD. Adjusting it made it graze the chain. I went back and forth with this a couple of times. Stared at it and considered raising the FD a couple of mm. Then I measured the difference between the tooth and the inside of the arm - 8.5mm. Raising the FD should align it next to a thinner part of the arm but would also degrade shifting.
I went around the shop measuring all the cranks on my and my wives bikes. Here's what I got: Shimano 600 -10mm Alpina 11.5 Ultegra 11.5 White VBC - 15mm DaVinci - 15mm Any suggestions, short of grinding the back of the arm? michael -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en-US. For more options, visit https://groups.google.com/groups/opt_out.
