Thanks -- what about with a single ring: how many cogs can you get out of the QB/SO dropout when all is optimized?
On Mon, Nov 25, 2013 at 11:16 AM, Cyclofiend Jim <[email protected]>wrote: > Didn't realize the Dingle required a 9 sp chain. > > My stock gearing setup is the 40/32 front chainring setup with a 14T fixed > and 18T FW. The 40x14 (centered) and 40x18 fit easily. The 32x18 is at > the end of the dropout with that chain length. > > Hope that helps, > > - Jim > > > On Monday, November 25, 2013 9:38:41 AM UTC-8, Patrick Moore wrote: > >> The Converted (Campy) Curt Custom ('03) has long 1010s, but given my >> peculiar choice of ring and cog, any ~70" cruising gear puts the axle in >> the middle of the dropout, but too close to the end to accommodate another >> full chain link. This means that the dropout cannot accommodate a larger >> cog that is 3 t bigger -- the axle is halfway out of the dropout with such >> a cog. >> >> A half link would work if I were not using a Dingle, which requires a 9 >> speed chain -- they don't make 9 speed chain half links (I asked Surly and >> half link makers). >> >> So, I am thinking of modifying, once again, the dropouts. Perhaps track >> ends? >> >> And this is the question: if optimally placed, how great a tooth >> difference can the track ends on the QB and SO accept? Or, are these track >> ends longer than Campy 1010s? >> >> Can a SO or QB accommodate a 4 t difference? >> >> Thanks. >> >> Patrick "no confusion, please, I've been quite clear" Moore >> >> -- >> *RESUMES THAT GET YOU NOTICED!* >> Certified Resume Writer >> http://resumespecialties.com/index.html<http://www.google.com/url?q=http%3A%2F%2Fresumespecialties.com%2Findex.html&sa=D&sntz=1&usg=AFQjCNGvfO7XcNjds72nVr2MRK3TzofP3g> >> [email protected] >> http://www.linkedin.com/in/patrickmooreresumespec/<http://www.google.com/url?q=http%3A%2F%2Fwww.linkedin.com%2Fin%2Fpatrickmooreresumespec%2F&sa=D&sntz=1&usg=AFQjCNGDq66YE8o4yymSTf2GCgueeFKsYQ> >> >> Albuquerque, NM >> > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/groups/opt_out. > -- *RESUMES THAT GET YOU NOTICED!* Certified Resume Writer http://resumespecialties.com/index.html [email protected] http://www.linkedin.com/in/patrickmooreresumespec/ Albuquerque, NM -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/groups/opt_out.
