Oh yes, and a protractor and compass. -Gregory
On Fri, Sep 18, 2009 at 6:40 PM, Gregory Pwneror <[email protected]>wrote: > I would make a nice list of minimum stuff, but it would be rather long, and > it seems many people don't have what I have. > > I have: > A drill press > Cordless drills > Corded drills > Bench saw > Saw bench > Skill saw > Jigsaw > Hand saws > And all the other hand tools, etc etc. > > I guess you would need: > > Clamps > Hand saw > A nice workbench > A steel ruler > Side cutters, pliers, screwdrivers etc. > A pencil > Hammer > Glue > Soldering Iron and related electronics stuff ($15 sort would do) > Sanding block (I like the cork ones) > Sandpaper (80 grit and 200 grit should do, and for painting you'd want some > 400 or 800 grit too) > Files > A power drill > A small set of drill bits (2-12 mm, you can buy other necessary ones later) > Nails > Screws > Paint brush > Stanley knife > Adjustable spanner > If you have the money, get a jigsaw. > > A hot glue gun can help too, just a dollar store one. > > I guess that's a list of the supplies and tools you'd need for a wooden > tank. You could probably cut the list down. > > -Gregory > > > On Fri, Sep 18, 2009 at 4:36 AM, <[email protected]> wrote: > >> >> On Sep 17, 2009, at 11:20 AM, Cold comfort <[email protected]> wrote: >> >> > >> > I would add a utility knife to the list. As well if buying plywood >> > from home depot and other large building supply stores they will cut >> > pieces for you at little or no cost other than the plywood. >> >> You have no quality control over those cuts, and the guy running the >> saw barely has a clue. I had them cut a 4' x 8' sheet down to four 2' >> x 4' sheets. I got three 2'2" x 4' sheets and one 1'6" x 4' sheet. >> Fortunately the cuts were just to get it small enough to transport; if >> they were critical I'd have been upset. >> >> -Bill Hamilton >> >> >> >> >> > --~--~---------~--~----~------------~-------~--~----~ You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat -~----------~----~----~----~------~----~------~--~---
