In a message dated 5/9/2010 2:44:58 A.M. Eastern Daylight Time, [email protected] writes:
Nice results thanks but i ran into another problem and am wondering if i should wait a bit longer to finish this milling part. on the muzzle brake, there are 2 openings per side, the first one is squarish like i have shown on the test cut piece, but the other has taped sides to it and i can't do that with the current set up. i am thinking how i am make another jig to fit within the vise at the correct angle (don't want to have to buy that turn table looking piece that i would have to mount under the cross vise). i have plenty of paper and pencils to work out a jig and i'll keep them near for when i have a brainstorm for the jig Chris, _Odyssey Slipways_ (http://hometown.aol.com/odysseyslipways/index.html) -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
