Ok i understand to a degree but yet i dont understand what you hook that up to other than a motor. and if i wanted to run a turret and the motors and a servo to pull the paintball gun trigger what would i have to do to run that. and if a motor controller is rated at a specific continuous current am i able to have a different current rated motor (say the motor is 27.5a and the controller is 30a continuous). this is where i have the most questions can you just show me all the electrical systems whithin your tank and or the electrical schematic. or like a basic idea like "you connect this to this and this to this."
Can i just make my own gear reduction? or do i have to buy the motor gear reductor (is it cheaper)? and what is the best motor for a 186lb tank with weight dispersion between 6 contact wheels (in your opinion anyways). and what are full skid turns? http://www.flickr.com/photos/organize/?start_batch=recent_uploads Well i want it to be able to withstand a person trying to break it. its not modeled but is to look similar to the m1a1 but nothing to similar (like an m3a3 and an m1a1). 38"-15"-7.5" basically high density plywood 5/8" -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
