Rather than having the keyway broached, why not look into having it wire edm cut
Sent via BlackBerry from T-Mobile -----Original Message----- From: Andy Kipp <[email protected]> Sender: [email protected] Date: Mon, 3 Dec 2012 20:17:00 To: <[email protected]> Reply-To: [email protected] Subject: [TANKS] Sprockets for MY1016Z3 Motor Folks, I'm in the process of making some sprockets for the MY1016Z3 motor. They are 10 tooth ANSI #35 chain sprockets with an 11MM bore and 4MM keyway. I am doing them on a CNC so its pretty easy for me to reproduce the sprocket. The spockets are made of free machining steel (12L14). However, the keyway broach and collar is going to set me back a few hundred bucks, so if anyone would requires this sprocket, let me know as I can make a few extra and sell them to offset the cost of the broach set. Attached is a drawing and SolidWorks model. Pardon the bad drawing, I made it up really quick as I figured not everyone had SolidWorks. -Andy -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
