BTW, I'm using the stock sprocket that came on them on 3 tanks. I have yet to have one of the chains fall off. I believe the stock sprocket is mated to a 40 pitch chain and 40 pitch sprocket on the drive shaft, but I would have to verify that.
Derek On Tue, Dec 4, 2012 at 12:39 AM, Derek Engelhaupt <[email protected]> wrote: > I thought some of the east coast guys were already doing this sort of > thing? > > Derek > > > On Mon, Dec 3, 2012 at 7:53 PM, Jason <[email protected]> wrote: > >> Rather than having the keyway broached, why not look into having it wire >> edm cut >> >> Sent via BlackBerry from T-Mobile >> >> -----Original Message----- >> From: Andy Kipp <[email protected]> >> Sender: [email protected] >> Date: Mon, 3 Dec 2012 20:17:00 >> To: <[email protected]> >> Reply-To: [email protected] >> Subject: [TANKS] Sprockets for MY1016Z3 Motor >> >> Folks, >> >> I'm in the process of making some sprockets for the MY1016Z3 motor. >> They are 10 tooth ANSI #35 chain sprockets with an 11MM bore and 4MM >> keyway. I am doing them on a CNC so its pretty easy for me to >> reproduce the sprocket. The spockets are made of free machining steel >> (12L14). >> >> However, the keyway broach and collar is going to set me back a few >> hundred bucks, so if anyone would requires this sprocket, let me know >> as I can make a few extra and sell them to offset the cost of the >> broach set. >> >> Attached is a drawing and SolidWorks model. Pardon the bad drawing, I >> made it up really quick as I figured not everyone had SolidWorks. >> >> -Andy >> >> -- >> You are currently subscribed to the "R/C Tank Combat" group. >> To post a message, send email to [email protected] >> To unsubscribe, send email to [email protected] >> Visit the group at http://groups.google.com/group/rctankcombat >> >> -- >> You are currently subscribed to the "R/C Tank Combat" group. >> To post a message, send email to [email protected] >> To unsubscribe, send email to [email protected] >> Visit the group at http://groups.google.com/group/rctankcombat >> > > -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
