I thought some of the east coast guys were already doing this sort of thing?
Derek On Mon, Dec 3, 2012 at 7:53 PM, Jason <[email protected]> wrote: > Rather than having the keyway broached, why not look into having it wire > edm cut > > Sent via BlackBerry from T-Mobile > > -----Original Message----- > From: Andy Kipp <[email protected]> > Sender: [email protected] > Date: Mon, 3 Dec 2012 20:17:00 > To: <[email protected]> > Reply-To: [email protected] > Subject: [TANKS] Sprockets for MY1016Z3 Motor > > Folks, > > I'm in the process of making some sprockets for the MY1016Z3 motor. > They are 10 tooth ANSI #35 chain sprockets with an 11MM bore and 4MM > keyway. I am doing them on a CNC so its pretty easy for me to > reproduce the sprocket. The spockets are made of free machining steel > (12L14). > > However, the keyway broach and collar is going to set me back a few > hundred bucks, so if anyone would requires this sprocket, let me know > as I can make a few extra and sell them to offset the cost of the > broach set. > > Attached is a drawing and SolidWorks model. Pardon the bad drawing, I > made it up really quick as I figured not everyone had SolidWorks. > > -Andy > > -- > You are currently subscribed to the "R/C Tank Combat" group. > To post a message, send email to [email protected] > To unsubscribe, send email to [email protected] > Visit the group at http://groups.google.com/group/rctankcombat > > -- > You are currently subscribed to the "R/C Tank Combat" group. > To post a message, send email to [email protected] > To unsubscribe, send email to [email protected] > Visit the group at http://groups.google.com/group/rctankcombat > -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
