Yes thats right :-)-tests have been made-After one year outside in sun and rain, an objeckt made of pla will get pale, but nothing are seen on the plastic. The most common form of bioplastic is polylactide acid or PLA and is made out of corn. Unfortunately, in order for PLA do biodegrade, it needs a certain kind of bacteria at just the right temperature. These are not found in landfills, (where most plastic bags end up), but require treatment at one of 42 commercial composting facilities in the U.S.
So i will not take my Centurion near one of the 42 composting facilities-But just stay in Denmark-And my tank will be safe :-) Den mandag den 18. april 2016 kl. 20.50.18 UTC+2 skrev TyngTech: > > PLA? That's biodegradable so don't let it get wet for any length of time. > Awesome work btw. > > ST > > > On Thursday, April 14, 2016 at 2:38:11 PM UTC-4, Niels Erik Kristensen > wrote: >> >> Iam using thise motors: >> http://www.hobbyking.com/hobbyking/store/__8490__Turnigy_4258_Brushless_Motor_800kv.html >> I print everything in PLA. And the thing around my motors are a cooling >> tube, with 2*45mm fan units in the top-Its home made like everything om my >> tank, i also made all drawings. I dont no yet if there are ant wear on my >> gears-But i can se wear marks on the tracks >> >> Den torsdag den 14. april 2016 kl. 18.36.26 UTC+2 skrev Jean-Maxime Cyr >> St-Pierre: >>> >>> Super job!! Look anwsome!! >>> >>> I got few questions...! >>> >>> What size your airplane motors are ?? >>> >>> What material your using for your gears?? I know there is new wires to >>> make super strong gearing out of nylon... >>> >>> What is the thing you made up for not overheating your motor? >>> >>> And after all this did you see any sign of wear on any of your part?? >>> Because your project seem to proof that the futur of our hobby pass by the >>> 3d printing like almost in any hobby it seems...!! >>> >>> Thank you >>> >>> Jean-Maxime Cyr St-Pierre >>> >>> >>> ------------------------------ >>> *De :* [email protected] <[email protected]> de la >>> part de Niels Erik Kristensen <[email protected]> >>> *Envoyé :* 12 avril 2016 17:09 >>> *À :* R/C Tank Combat >>> *Objet :* [TANKS] Re: Centurion mrk 5 >>> >>> Final stres test before i continue the build-All test OK >>> https://www.youtube.com/watch?v=3qGgA0uKl-o >>> >>> Den mandag den 28. marts 2016 kl. 16.56.35 UTC+2 skrev Niels Erik >>> Kristensen: >>>> >>>> Hey. iam making a Centurion mrk 5 Danish version. >>>> All moving parts made with my 3D printer. Brushless motors and lipo >>>> battery . >>>> First track test today: >>>> https://www.youtube.com/watch?v=iXr4a3K6Jd8 >>>> <https://www.youtube.com/watch?v=iXr4a3K6Jd8> >>>> Centurion 1/6 Track test <https://www.youtube.com/watch?v=iXr4a3K6Jd8> >>>> www.youtube.com >>>> Første test af motor + gear+ bælte på min hjemme byggede centurion i >>>> størelse 1-6. Alle dele er printet i PLA på min 3D printer ( Undtaget >>>> selve >>>> karosseriet ) >>>> >>>> -- >>> -- >>> You are currently subscribed to the "R/C Tank Combat" group. >>> To post a message, send email to [email protected] >>> To unsubscribe, send email to [email protected] >>> Visit the group at http://groups.google.com/group/rctankcombat >>> >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "R/C Tank Combat" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
