Looks very nice. For your next video, how about a little stress test of the suspension please? Thank you.
On Monday, August 1, 2016 at 5:22:30 PM UTC-4, Niels Erik Kristensen wrote: > > Now i have tested my PLA printed Centurion over 2 months, and there are no > sign of damage on the mowing parts ( gears and tracks) Here are a video > from a event where i was driving in front of spectators for fun: > https://www.youtube.com/watch?v=pEo3s8yDLEA&feature=youtu.be > > Den tirsdag den 19. april 2016 kl. 08.39.21 UTC+2 skrev Niels Erik > Kristensen: >> >> Pla are strongere than ABS-But not elastic. Its almost like the cast iron >> of plastic. Make a solid 4-5mm pla part and se for yourself. ABS stinks >> when printet-And wrap alot during the printing. In Denmark where i >> live,high temperature are rare. And if one parts break i can easyly print a >> new one. >> By the way-Wood are also bio degradeable-And it will degrade faster than >> PLA-Maby paintball filled with termittes will work better :-) >> >> >> Den tirsdag den 19. april 2016 kl. 08.26.25 UTC+2 skrev Niels Erik >> Kristensen: >>> >>> Most of my parts are printet with 99% infill-Ore vith 2mm walls and 20 % >>> infil >>> >>> Den tirsdag den 19. april 2016 kl. 01.42.45 UTC+2 skrev Caleb Smith: >>>> >>>> What you have to worry more about PLA is its warpage in the heat. PLA >>>> parts will begin to warp if left in a hot car or possibly just leaving >>>> your >>>> tank in the sun. Printing with ABS will eliminate warpage and yield >>>> stronger parts, but for true durability you should look into nylon. >>> >>> -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
