Pla are strongere than ABS-But not elastic. Its almost like the cast iron of plastic. Make a solid 4-5mm pla part and se for yourself. ABS stinks when printet-And wrap alot during the printing. In Denmark where i live,high temperature are rare. And if one parts break i can easyly print a new one. By the way-Wood are also bio degradeable-And it will degrade faster than PLA-Maby paintball filled with termittes will work better :-)
Den tirsdag den 19. april 2016 kl. 08.26.25 UTC+2 skrev Niels Erik Kristensen: > > Most of my parts are printet with 99% infill-Ore vith 2mm walls and 20 % > infil > > Den tirsdag den 19. april 2016 kl. 01.42.45 UTC+2 skrev Caleb Smith: >> >> What you have to worry more about PLA is its warpage in the heat. PLA >> parts will begin to warp if left in a hot car or possibly just leaving your >> tank in the sun. Printing with ABS will eliminate warpage and yield >> stronger parts, but for true durability you should look into nylon. > > -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
