It's looking super good!!! Nice work and looking foward to see this tank fully operationnal!!!
It's sure proof that 3d printing is the new way to make things!! Do your turret is entirely 3d printed??? It's looking so nice as the original casted one...!!!! Jean-Maxime Cyr St-Pierre Le 1 août 2016 5:22 PM, "Niels Erik Kristensen" <[email protected]> a écrit : > Now i have tested my PLA printed Centurion over 2 months, and there are no > sign of damage on the mowing parts ( gears and tracks) Here are a video > from a event where i was driving in front of spectators for fun: > https://www.youtube.com/watch?v=pEo3s8yDLEA&feature=youtu.be > > Den tirsdag den 19. april 2016 kl. 08.39.21 UTC+2 skrev Niels Erik > Kristensen: >> >> Pla are strongere than ABS-But not elastic. Its almost like the cast iron >> of plastic. Make a solid 4-5mm pla part and se for yourself. ABS stinks >> when printet-And wrap alot during the printing. In Denmark where i >> live,high temperature are rare. And if one parts break i can easyly print a >> new one. >> By the way-Wood are also bio degradeable-And it will degrade faster than >> PLA-Maby paintball filled with termittes will work better :-) >> >> >> Den tirsdag den 19. april 2016 kl. 08.26.25 UTC+2 skrev Niels Erik >> Kristensen: >>> >>> Most of my parts are printet with 99% infill-Ore vith 2mm walls and 20 % >>> infil >>> >>> Den tirsdag den 19. april 2016 kl. 01.42.45 UTC+2 skrev Caleb Smith: >>>> >>>> What you have to worry more about PLA is its warpage in the heat. PLA >>>> parts will begin to warp if left in a hot car or possibly just leaving your >>>> tank in the sun. Printing with ABS will eliminate warpage and yield >>>> stronger parts, but for true durability you should look into nylon. >>> >>> -- > -- > You are currently subscribed to the "R/C Tank Combat" group. > To post a message, send email to [email protected] > To unsubscribe, send email to [email protected] > Visit the group at http://groups.google.com/group/rctankcombat > > --- > You received this message because you are subscribed to the Google Groups > "R/C Tank Combat" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
