I like William Miller's idea of slitting PVC conduit. Must be a little tricky ripping it with a saw. It's fastened to the rails using stainless clamps. There are pictures of it and other good wire mgt. on his website. I have not found a reasonably priced wire tray to attach to the rails. Especially outdoor-rated.
Kirk Herander VSE On Mar 24, 2013, at 8:07 AM, Chris Mason <[email protected]> wrote: > I don't want the enclosed type, I am looking for wire tray as we will support > the airco pipes and some conduits. > > On Sat, Mar 23, 2013 at 9:33 PM, Max Balchowsky <[email protected]> wrote: >> I don't know your exact application, but I've used Carlon wireways for >> years. Our application most of the time was to use the 4x4 gutter in lieu of >> metal gutter under the inverters,disconnects, Panelboards, etc. >> >> http://www.carlonsales.com/wiresafe.php >> >> Max Balchowsky >> Design Engineer >> SEE Systems >> 1048 Irvine Ave Suite 217 >> Newport Beach, Ca. 92660 >> 760-403-6810 >> "Building a Better Future For The Next Generation" >> >> From: Chris Mason <[email protected]> >> To: RE-wrenches <[email protected]> >> Sent: Friday, March 22, 2013 12:07 PM >> Subject: [RE-wrenches] Cable tray >> >> I'm looking for flat roof cable tray system that is cost effective. We >> previously used Cablofil and Cablo-port FSL 12" tray but it is very >> expensive for our current application due to the size of the roof. We need >> to install about 200' of tray and Cablofil galvanized is eating up the >> budget. Can anyone recommend a cheaper alternative. >> >> -- >> Chris Mason >> >> >> _______________________________________________ >> List sponsored by Home Power magazine >> >> List Address: [email protected] >> >> Change email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out participant bios: >> www.members.re-wrenches.org >> >> >> >> >> _______________________________________________ >> List sponsored by Home Power magazine >> >> List Address: [email protected] >> >> Change email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out participant bios: >> www.members.re-wrenches.org > > > > -- > Chris Mason > President, Comet Systems Ltd > www.cometenergysystems.com > Cell: 264.235.5670 > Skype: netconcepts > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
