What part of 392 would be a problem? On Mon, Mar 25, 2013 at 6:12 PM, Glenn Burt <[email protected]> wrote:
> I think you will find it difficult to adhere to Article 392 and use a > cable tray on a rooftop with source circuit conductors, if that is your > hope.**** > > ** ** > > -Glenn**** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Chris Mason > *Sent:* Friday, March 22, 2013 3:08 PM > *To:* RE-wrenches > *Subject:* [RE-wrenches] Cable tray**** > > ** ** > > I'm looking for flat roof cable tray system that is cost effective. We > previously used Cablofil and Cablo-port FSL 12" tray but it is very > expensive for our current application due to the size of the roof. We need > to install about 200' of tray and Cablofil galvanized is eating up the > budget. Can anyone recommend a cheaper alternative. > **** > > ** ** > > -- > Chris Mason**** > > ** ** > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > > -- Chris Mason President, Comet Systems Ltd www.cometenergysystems.com Cell: 264.235.5670 Skype: netconcepts
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
