We have had good luck with "Snake Tray"<http://snaketray.com/solar/> from Cable Management Solutions. Comes in Galv and Stainless, 2" x 2" or 4" x 4"
[NYLE LOGO SMALL] Mark Richardson mrichard...@newyorklightenergy.com<mailto:mrichard...@newyorklightenergy.com> From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Chris Mason Sent: Sunday, March 24, 2013 8:24 PM To: RE-wrenches Subject: Re: [RE-wrenches] Cable tray We use Cablofil but at $10/ft, it's OK for the inverter area but for large roofs, it is expensive. On Sun, Mar 24, 2013 at 3:39 PM, Kirk <k...@vtsolar.com<mailto:k...@vtsolar.com>> wrote: I like William Miller's idea of slitting PVC conduit. Must be a little tricky ripping it with a saw. It's fastened to the rails using stainless clamps. There are pictures of it and other good wire mgt. on his website. I have not found a reasonably priced wire tray to attach to the rails. Especially outdoor-rated. Kirk Herander VSE On Mar 24, 2013, at 8:07 AM, Chris Mason <cometenergysyst...@gmail.com<mailto:cometenergysyst...@gmail.com>> wrote: I don't want the enclosed type, I am looking for wire tray as we will support the airco pipes and some conduits. On Sat, Mar 23, 2013 at 9:33 PM, Max Balchowsky <m...@seesolar.com<mailto:m...@seesolar.com>> wrote: I don't know your exact application, but I've used Carlon wireways for years. Our application most of the time was to use the 4x4 gutter in lieu of metal gutter under the inverters,disconnects, Panelboards, etc. http://www.carlonsales.com/wiresafe.php Max Balchowsky Design Engineer SEE Systems 1048 Irvine Ave Suite 217 Newport Beach, Ca. 92660 760-403-6810<tel:760-403-6810> "Building a Better Future For The Next Generation" ________________________________ From: Chris Mason <cometenergysyst...@gmail.com<mailto:cometenergysyst...@gmail.com>> To: RE-wrenches <re-wrenches@lists.re-wrenches.org<mailto:re-wrenches@lists.re-wrenches.org>> Sent: Friday, March 22, 2013 12:07 PM Subject: [RE-wrenches] Cable tray I'm looking for flat roof cable tray system that is cost effective. We previously used Cablofil and Cablo-port FSL 12" tray but it is very expensive for our current application due to the size of the roof. We need to install about 200' of tray and Cablofil galvanized is eating up the budget. Can anyone recommend a cheaper alternative. -- Chris Mason _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org<mailto:RE-wrenches@lists.re-wrenches.org> Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm> Check out participant bios: www.members.re-wrenches.org<http://www.members.re-wrenches.org> _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org<mailto:RE-wrenches@lists.re-wrenches.org> Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm> Check out participant bios: www.members.re-wrenches.org<http://www.members.re-wrenches.org> -- Chris Mason President, Comet Systems Ltd www.cometenergysystems.com<http://www.cometenergysystems.com> Cell: 264.235.5670<tel:264.235.5670> Skype: netconcepts _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org<mailto:RE-wrenches@lists.re-wrenches.org> Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm> Check out participant bios: www.members.re-wrenches.org<http://www.members.re-wrenches.org> _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org<mailto:RE-wrenches@lists.re-wrenches.org> Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm> Check out participant bios: www.members.re-wrenches.org<http://www.members.re-wrenches.org> -- Chris Mason President, Comet Systems Ltd www.cometenergysystems.com<http://www.cometenergysystems.com> Cell: 264.235.5670 Skype: netconcepts
<<inline: image003.jpg>>
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org