392.3(B)1
This was also pointed out in a recent article in Solar Pro talking about Wire Management issues. From: Chris Mason [mailto:[email protected]] Sent: Monday, March 25, 2013 6:17 PM To: [email protected]; RE-wrenches Subject: Re: [RE-wrenches] Cable tray What part of 392 would be a problem? On Mon, Mar 25, 2013 at 6:12 PM, Glenn Burt <[email protected]> wrote: I think you will find it difficult to adhere to Article 392 and use a cable tray on a rooftop with source circuit conductors, if that is your hope. -Glenn From: [email protected] [mailto:[email protected]] On Behalf Of Chris Mason Sent: Friday, March 22, 2013 3:08 PM To: RE-wrenches Subject: [RE-wrenches] Cable tray I'm looking for flat roof cable tray system that is cost effective. We previously used Cablofil and Cablo-port FSL 12" tray but it is very expensive for our current application due to the size of the roof. We need to install about 200' of tray and Cablofil galvanized is eating up the budget. Can anyone recommend a cheaper alternative. -- Chris Mason _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org -- Chris Mason President, Comet Systems Ltd www.cometenergysystems.com Cell: 264.235.5670 Skype: netconcepts
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
