We typically bring the electrical up through the roof under the array for best aesthetics. We have been using SLBs and plumbing style flashing for years with good results.
However, in recent times the panel frames have been leaning towards thinner frames. The result is that the plumbing flashing is being turned inside out because it has less room, so we have been potting it with sealant - which is not ideal. I've been looking at the soladeck, but they are too large and expensive for a junction box (not combiner) use. Any other smaller, less expensive alternatives others have come across? thanks, Troy Harvey --------------------- Principal Engineer Heliocentric 801-453-9434 [email protected] _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
