The zilla flashing looks perfect. Thanks!
thanks, Troy Harvey --------------------- Principal Engineer Heliocentric 801-453-9434 [email protected] On Mar 25, 2013, at 1:37 PM, Aaron Mandelkorn <[email protected]> wrote: > I believe that Zilla and Quick Mount makes flashed options for conduit entry > through the roof. You will still have to use a SLB but they are much lower > profile than the Oaty flashings used in the past and should fit under thin > framed modules. > > > > Aaron Mandelkorn > NABCEP Certified PV Installer > Renewable Energy Outfitters > Box 65 Salida, CO. 81201 > (970)596-3744 > [email protected] > www.reosolar.com > > > > > > > > > > > > > > > > On Mar 25, 2013, at 1:28 PM, Troy Harvey wrote: > >> We typically bring the electrical up through the roof under the array for >> best aesthetics. We have been using SLBs and plumbing style flashing for >> years with good results. >> >> However, in recent times the panel frames have been leaning towards thinner >> frames. The result is that the plumbing flashing is being turned inside out >> because it has less room, so we have been potting it with sealant - which is >> not ideal. I've been looking at the soladeck, but they are too large and >> expensive for a junction box (not combiner) use. Any other smaller, less >> expensive alternatives others have come across? >> >> >> thanks, >> >> Troy Harvey >> --------------------- >> Principal Engineer >> Heliocentric >> 801-453-9434 >> [email protected] >> >> >> _______________________________________________ >> List sponsored by Home Power magazine >> >> List Address: [email protected] >> >> Change email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out participant bios: >> www.members.re-wrenches.org >> > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
