try digikey or mouser electronics 
 
todd
 
 

On Monday, October 20, 2014 1:51pm, "Corey Shalanski" 
<[email protected]> said:



Wrenches,
Since my previous post (see below) we have recovered the faulty modules and are 
now looking to replace the diodes in order to make them functional again. I 
have had no success sourcing replacement diodes from the original module 
manufacturer, Mage Solar.
Can anyone recommend a source for replacement diodes?
--
Corey Shalanski
Joule Solar
New Orleans, LA




ᐧ

On Tue, Aug 5, 2014 at 10:27 AM, <[ [email protected] 
]( mailto:[email protected] )> wrote:

Message: 10
Date: Tue, 5 Aug 2014 09:03:09 -0500
From: Corey Shalanski <[ [email protected] ]( 
mailto:[email protected] )>
To: [ [email protected] ]( 
mailto:[email protected] )
Subject: [RE-wrenches] Diode Failure
Message-ID:
        <[ ca+smqz1c7kszuqnvzqr0mmux3f2dt6ydum40iseczr2ejrg...@mail.gmail.com 
]( 
mailto:ca%2bsmqz1c7kszuqnvzqr0mmux3f2dt6ydum40iseczr2ejrga%[email protected] )>
Content-Type: text/plain; charset="utf-8"

Wrenches,

We recently were contacted by a customer who reported a lightning strike
close to his house. His online monitoring revealed that 30 of 35
microinverters simultaneously stopped producing power. On initial visit to
the jobsite we measured Voc on many modules - either 12V or 24V instead of
rated 36V. On a second visit we discovered that bypass diodes - either 1 or
2 corresponding to observed voltage loss - had failed on each of the faulty
modules.

My question is: Can anyone support the theory that a nearby lightning flash
can cause mass bypass diode failure?

--
Corey Shalanski
Joule Energy
New Orleans, LA


Sent from Finest Planet WebMail.
_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/[email protected]/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to