Hi William,
If the Classic won't work, the Atkinson Generator Start Control
Module should do the job. It is basically like the old Gen Wiz.
http://www.atkinsonelectronics.com/manufacturing/products/GSCM.asp
Drake
At 03:45 PM 11/7/2014, you wrote:
Content-Type: multipart/related;
boundary="----=_NextPart_000_00FA_01CFFA88.AA65D390"
Content-Language: en-us
Friend:
I am consulting on an installation without an inverter. We need to
start and run a generator to power a Samlex battery charger. We
have a Midnite Classic, but in reviewing the manual it is not clear
if the unit can be programmed to control a generator sensibly. I
have a call into Midnite and am awaiting a reply.
Just starting a generator at a certain low voltage point is
inadequate. The generator needs to run until bulk and absorption
are accomplished.
We did connect an Outback MX60 to a Mate without an FX once. The
menu structure was very different from any manual but we were able
to start a generator remotely with the manual relay settings. I
just can't remember if it is possible to take advantage of all of
the AGS features such as multiple start conditions and the
absorption timers with a Mate and an FM60.
Has anyone addressed this scenario?
William
Gradient Cap_mini
Lic 773985
<http://www.millersolar.com/>millersolar.com
805-438-5600
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/[email protected]/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
