William,

You might also try Magnum ME-AGS-S, 
http://magnumenergy.com/auto-generator-start-stand-alone-me-ags-s/ 
<http://magnumenergy.com/auto-generator-start-stand-alone-me-ags-s/>

It has a start voltage and a run time. Not sure if it has an Absorb end mode 
other than the run time.

Thank you,

Maverick



> On Nov 7, 2014, at 2:45 PM, William Miller <[email protected]> wrote:
> 
> Friend:
>  
> I am consulting on an installation without an inverter.  We need to start and 
> run a generator to power a Samlex battery charger.  We have a Midnite 
> Classic, but in reviewing the manual it is not clear if the unit can be 
> programmed to control a generator sensibly.  I have a call into Midnite and 
> am awaiting a reply.
>  
> Just starting a generator at a certain low voltage point is inadequate.  The 
> generator needs to run until bulk and absorption are accomplished.
>  
> We did connect an Outback MX60 to a Mate without an FX once.  The menu 
> structure was very different from any manual but we were able to start a 
> generator remotely with the manual relay settings.  I just can’t remember if 
> it is possible to take advantage of all of the AGS features such as multiple 
> start conditions and the absorption timers with a Mate and an FM60.
>  
> Has anyone addressed this scenario? 
>  
> William
>  
>  
> <image002.jpg>
> Lic 773985
> millersolar.com <http://www.millersolar.com/>
> 805-438-5600
>  
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: [email protected] 
> <mailto:[email protected]>
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org 
> <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
> 
> List-Archive: 
> http://www.mail-archive.com/[email protected]/maillist.html 
> <http://www.mail-archive.com/[email protected]/maillist.html>
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>
> 
> Check out or update participant bios:
> www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/[email protected]/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to