Drake: Will the Atkinson manage the generator such that the gen will run long enough for a bulk and absorption cycle? Are the parameters field settable?
William Miller Solar > On Nov 8, 2014, at 8:47 AM, Drake <[email protected]> > wrote: > > Hi William, > > If the Classic won't work, the Atkinson Generator Start Control Module should > do the job. It is basically like the old Gen Wiz. > > http://www.atkinsonelectronics.com/manufacturing/products/GSCM.asp > > Drake > > At 03:45 PM 11/7/2014, you wrote: >> Content-Type: multipart/related; >> boundary="----=_NextPart_000_00FA_01CFFA88.AA65D390" >> Content-Language: en-us >> >> Friend: >> >> I am consulting on an installation without an inverter. We need to start >> and run a generator to power a Samlex battery charger. We have a Midnite >> Classic, but in reviewing the manual it is not clear if the unit can be >> programmed to control a generator sensibly. I have a call into Midnite and >> am awaiting a reply. >> >> Just starting a generator at a certain low voltage point is inadequate. The >> generator needs to run until bulk and absorption are accomplished. >> >> We did connect an Outback MX60 to a Mate without an FX once. The menu >> structure was very different from any manual but we were able to start a >> generator remotely with the manual relay settings. I just can’t remember if >> it is possible to take advantage of all of the AGS features such as multiple >> start conditions and the absorption timers with a Mate and an FM60. >> >> Has anyone addressed this scenario? >> >> William >> >> >> <12c773.jpg> >> Lic 773985 >> millersolar.com >> 805-438-5600 >> >> >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/[email protected]/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
