Hi Jason www.apoc.com<http://www.apoc.com>
Kind regards Tom Duffy Senior Solar Design Engineer [Real-logo-X-195] E-Mail: [email protected]<mailto:[email protected]> **Please note my new email – You will now be able to find me at: [email protected]<mailto:[email protected]> Please update your records so we don’t lose touch!** Main Number: 888-826-0939 Panama Office: 507-836-5588 X 122 Direct Toll Free: 888-503-6772 International: 575-539-2111 X 122 SKYPE Address: thesolarbiz (e-mail first) NOTICE: Due to recent budget cuts, the rising cost of electricity, gas, and oil...plus the current state of the economy............the light at the end of the tunnel, has been turned off… It should have been solar. Confidentiality Notice: This message including any attachments is for the sole use of the intended recipient and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender and delete any copies of this message. From: RE-wrenches [mailto:[email protected]] On Behalf Of Jason Szumlanski Sent: Tuesday, June 07, 2016 7:18 AM To: RE-wrenches <[email protected]> Subject: Re: [RE-wrenches] Steel Trusses While on the subject, anyone have a good source of 2" wide Butyl double sided tape? Our local roofing suppliers only have 1". On Mon, Jun 6, 2016 at 7:36 PM, Peter Giroux <[email protected]<mailto:[email protected]>> wrote: Chad I second August. We have had great success with self tapping screws. Put some butyl on the L-foot and set it in. thx peter ----- Original Message ----- From: August Goers<mailto:[email protected]> To: RE-wrenches<mailto:[email protected]> Sent: Monday, June 06, 2016 6:44 PM Subject: Re: [RE-wrenches] Steel Trusses Hi Chad, We’ve occasionally installed onto steel trusses with either self drilling screws (no pilot required) or thread forming screws (pilot hole required). See attached sample spec sheets. I suppose you could install a standard tile hook type product with the types of fasters I listed above. Or, hire a roofer to waterproof your stanchions and reinstall the removed tiles. More and more, we are moving towards the latter because we’ve bumped into issues with degrading underlayment (felt paper) under tile roofs. Best, August Luminalt From: RE-wrenches [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Chad Waits Sent: Monday, June 06, 2016 3:15 PM To: RE-wrenches Subject: [RE-wrenches] Steel Trusses Wrenches, Anyone out there have any experience attaching arrays (from the topside) to roofs with steel trusses under plywood decking? We’ve got a new project that has steel trusses and we would prefer to not have to spend time in the attic bolting through (it was 113 degrees here today)… Is there a fastening system out there that anyone has experience with? Oh, the roof is composite/strengthened clay tile as well. Thanks! Chad Waits President/Owner – Net Zero Solar 101 W. 5th St., Tucson, AZ 85705 Office: 520-207-4053<tel:520-207-4053> Cell: 520-270-4873<tel:520-270-4873> NABCEP Certified PV Installation Professional NABCEP Certified Solar Heating Installer [cid:[email protected]] ________________________________ _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected]<mailto:[email protected]> Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm> Check out or update participant bios: www.members.re-wrenches.org<http://www.members.re-wrenches.org> _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected]<mailto:[email protected]> Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm> Check out or update participant bios: www.members.re-wrenches.org<http://www.members.re-wrenches.org>
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
