Yeah, the three suppliers in my area all give me the same nonsense - it's not in their catalog and they have to order a full pallet to get it. I'm hoping to find a source online.
Jason On Tue, Jun 7, 2016 at 4:41 PM, Tom Duffy <[email protected]> wrote: > > > While on the subject, anyone have a good source of 2" wide Butyl double > sided tape? Our local roofing suppliers only have 1". > > > > > > > On Mon, Jun 6, 2016 at 7:36 PM, Peter Giroux <[email protected]> > wrote: > > Chad > > > > I second August. We have had great success with self tapping screws. Put > some butyl on the L-foot and set it in. > > > > thx > > peter > > ----- Original Message ----- > > *From:* August Goers <[email protected]> > > *To:* RE-wrenches <[email protected]> > > *Sent:* Monday, June 06, 2016 6:44 PM > > *Subject:* Re: [RE-wrenches] Steel Trusses > > > > Hi Chad, > > > > We’ve occasionally installed onto steel trusses with either self drilling > screws (no pilot required) or thread forming screws (pilot hole required). > See attached sample spec sheets. > > > > I suppose you could install a standard tile hook type product with the > types of fasters I listed above. Or, hire a roofer to waterproof your > stanchions and reinstall the removed tiles. More and more, we are moving > towards the latter because we’ve bumped into issues with degrading > underlayment (felt paper) under tile roofs. > > > > Best, > > > > August > > Luminalt > > > > *From:* RE-wrenches [mailto:[email protected]] *On > Behalf Of *Chad Waits > *Sent:* Monday, June 06, 2016 3:15 PM > *To:* RE-wrenches > *Subject:* [RE-wrenches] Steel Trusses > > > > Wrenches, > > > > Anyone out there have any experience attaching arrays (from the topside) > to roofs with steel trusses under plywood decking? We’ve got a new project > that has steel trusses and we would prefer to not have to spend time in the > attic bolting through (it was 113 degrees here today)… Is there a > fastening system out there that anyone has experience with? > > > > Oh, the roof is composite/strengthened clay tile as well. > > > > Thanks! > > > > Chad Waits > > President/Owner – Net Zero Solar > > 101 W. 5th St., Tucson, AZ 85705 > > Office: 520-207-4053 > > Cell: 520-270-4873 > > NABCEP Certified PV Installation Professional > > NABCEP Certified Solar Heating Installer > > > > > > ------------------------------ > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > > <https://goo.gl/mCjCI5> [image: Logo-Sq-80.png] Jason Szumlanski Principal Solar Designer Florida Solar Design Group <http://FloridaSolarDesignGroup.com> (239) 491-8010 main office (239) 322-5079 direct (239) 410-4985 mobile *6418 Commerce Park Dr, Fort Myers, FL 33966* *FL Certified Solar Contractor License CVC56956 *
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
