We use this: https://www.bigrocksupply.com/store/p/5943-EternaBond-DoubleStick-2-in-x-50-ft.aspx?feed=Froogle&gclid=CIP7jrKEl80CFVclgQod0pkJvA
> âYeah, the three suppliers in my area all give me the same nonsense - > it's > not in their catalog and they have to order a full pallet to get it. I'm > hoping to find a source online. > > Jason > > > > On Tue, Jun 7, 2016 at 4:41 PM, Tom Duffy <[email protected]> wrote: > >> >> >> While on the subject, anyone have a good source of 2" wide Butyl double >> sided tape? Our local roofing suppliers only have 1". >> >> >> >> >> >> >> On Mon, Jun 6, 2016 at 7:36 PM, Peter Giroux <[email protected]> >> wrote: >> >> Chad >> >> >> >> I second August. We have had great success with self tapping screws. >> Put >> some butyl on the L-foot and set it in. >> >> >> >> thx >> >> peter >> >> ----- Original Message ----- >> >> *From:* August Goers <[email protected]> >> >> *To:* RE-wrenches <[email protected]> >> >> *Sent:* Monday, June 06, 2016 6:44 PM >> >> *Subject:* Re: [RE-wrenches] Steel Trusses >> >> >> >> Hi Chad, >> >> >> >> Weâve occasionally installed onto steel trusses with either self >> drilling >> screws (no pilot required) or thread forming screws (pilot hole >> required). >> See attached sample spec sheets. >> >> >> >> I suppose you could install a standard tile hook type product with the >> types of fasters I listed above. Or, hire a roofer to waterproof your >> stanchions and reinstall the removed tiles. More and more, we are moving >> towards the latter because weâve bumped into issues with degrading >> underlayment (felt paper) under tile roofs. >> >> >> >> Best, >> >> >> >> August >> >> Luminalt >> >> >> >> *From:* RE-wrenches [mailto:[email protected]] >> *On >> Behalf Of *Chad Waits >> *Sent:* Monday, June 06, 2016 3:15 PM >> *To:* RE-wrenches >> *Subject:* [RE-wrenches] Steel Trusses >> >> >> >> Wrenches, >> >> >> >> Anyone out there have any experience attaching arrays (from the topside) >> to roofs with steel trusses under plywood decking? Weâve got a new >> project >> that has steel trusses and we would prefer to not have to spend time in >> the >> attic bolting through (it was 113 degrees here today)⦠Is there a >> fastening system out there that anyone has experience with? >> >> >> >> Oh, the roof is composite/strengthened clay tile as well. >> >> >> >> Thanks! >> >> >> >> Chad Waits >> >> President/Owner â Net Zero Solar >> >> 101 W. 5th St., Tucson, AZ 85705 >> >> Office: 520-207-4053 >> >> Cell: 520-270-4873 >> >> NABCEP Certified PV Installation Professional >> >> NABCEP Certified Solar Heating Installer >> >> >> >> >> >> ------------------------------ >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/[email protected]/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org >> >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/[email protected]/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org >> >> >> > > > > > > <https://goo.gl/mCjCI5> > > > [image: Logo-Sq-80.png] > > Jason Szumlanski > > Principal Solar Designer > > Florida Solar Design Group <http://FloridaSolarDesignGroup.com> > > (239) 491-8010 main office > > (239) 322-5079 direct > > (239) 410-4985 mobile > > *6418 Commerce Park Dr, Fort Myers, FL 33966* > > *FL Certified Solar Contractor License CVC56956 * > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
