Check to see if it’s programming matches its wired and expected voltage output configuration.
Sent from my iPhone > On Jan 8, 2018, at 6:13 PM, David Palumbo <[email protected]> wrote: > > I am troubleshooting a 6kw EcoGen LP gas generator in my neighborhood that > starts quickly > • but immediately shuts down with an “Under Voltage” shutdown alarm > • I can clear shutdown alarm and restart with same result. I tried this a few > times with same result. One of the start attempts included a back fire before > shutting down. > • Generator was recently run successfully for a few hours during a cold snap. > Started after several attempts at -10 F. > • According to the EcoGen manual this Under Voltage alarm is triggered “If > the generator voltage falls below 85% of nominal for more than 15 seconds”. > This definitely isn’t happening as the generator starts as usual but shuts > down within one or two seconds. > I will check for fouled spark plugs tomorrow. Anything else that might be the > problem? > > David Palumbo > Independent Power LLC > Hyde Park, VT > 802-371-8678 voice or text > > Sent from Mail for Windows 10 > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/[email protected]/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
