Looks fine to me, Jason. Did you ask him to cite a particular code rule? Only other issue would be is if either of those pieces requires more space in their install instructions/Mfgr specs.
Good luck Benn Kilburn SkyFire Energy 780-906-7807 > On Mar 11, 2020, at 10:18 AM, Jason Szumlanski > <ja...@floridasolardesigngroup.com> wrote: > > I have an inspector telling me that this pictured fusible disconnect is too > close to the adjacent enclosure. Is anyone aware of a code supported spacing > requirement or manufacturer specification on such a thing? I have 3-1/2 > inches from the handle to the enclosure which I believe is ample space for > safe and effective operation of the handle. > > Jason Szumlanski > <CameraZOOM-20200311121356077.jpg> > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org