EJOT https://www.ejot.com/Building-Fasteners/Applications/Fastening-Systems-for-Solar-Installations/For-roof-systems/c/SOLAR_FASTENING_SYSTEMS_ROOFING
William Miller www.millersolar.com > On Oct 17, 2020, at 7:53 AM, Jay <[email protected]> wrote: > > What do people recommend for a metal roof ( with flat sections, not > corrugated)on 3/16” thick x 2” wide C channel for attaching L feet > > Self taping fasteners would be the easiest. Doing a nut and bolt would be > possible but quite time consuming. > A machine self taping bolt and then adding a nut would be a lot easier than > nut and bolt. > > But that is my question. Is a self taping screw enough or does it need to be > bolted? > > Jay > Peltz power > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
