Why puncture the metal can't S-5 be used. Jerry On Sat, Oct 17, 2020, 12:42 PM Jay <[email protected]> wrote:
> What do people recommend for a metal roof ( with flat sections, not > corrugated)on 3/16” thick x 2” wide C channel for attaching L feet > > Self taping fasteners would be the easiest. Doing a nut and bolt would be > possible but quite time consuming. > A machine self taping bolt and then adding a nut would be a lot easier > than nut and bolt. > > But that is my question. Is a self taping screw enough or does it need to > be bolted? > > Jay > Peltz power > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
