Hi dave You’ll need a new hub and mate 3S.
And check to make sure the main breakers are 250 amp. Jay Peltz power. > On May 17, 2021, at 8:21 AM, [email protected] wrote: > > > I am considering swapping in new OutBack inverters into one of my > neighborhoods 24V off grid systems. It now has two FX2524’s. The demands on > the system have grown, now a two family home with a 240Vac mini-split for air > conditioning and a 240Vac Grundfos SQ 1/2hp sub pump to be added this summer > to the system. Drilling a well for a back-up to the gravity fed spring water > which has been getting too low during the past few summers. > I’m assuming that I should go with two VFXR3524’s. > Will this be a direct swap in as far as having the same wiring setup into an > OutBack Flexware system? And will it work with an older Mate? > Anything else I should know about these OutBack “R” inverters? > > Dave Palumbo > Hyde Park, VT > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
