Dave, An Alternate solution might be to find two good used VFX3524's. All circuit boards are available from Zonna if they need repair. I have one if you could find another somewhere. Contact me off list if interested.
John Blittersdorf NABCEP Certified Solar PV Installer™ CV Wind Service (and solar) 200 West Road N Chittenden, VT 05763 802-770-8625 www.offgridvermont.com On Mon, May 17, 2021 at 4:18 PM <[email protected]> wrote: > I am considering swapping in new OutBack inverters into one of my > neighborhoods 24V off grid systems. It now has two FX2524’s. The demands on > the system have grown, now a two family home with a 240Vac mini-split for > air conditioning and a 240Vac Grundfos SQ 1/2hp sub pump to be added this > summer to the system. Drilling a well for a back-up to the gravity fed > spring water which has been getting too low during the past few summers. > > I’m assuming that I should go with two VFXR3524’s. > > Will this be a direct swap in as far as having the same wiring setup into > an OutBack Flexware system? And will it work with an older Mate? > > Anything else I should know about these OutBack “R” inverters? > > > > Dave Palumbo > > Hyde Park, VT > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
