I would look at connections first, lug that is not as tight as it ne we do to be, a breaker failing, outlets that are either push in wires or have loose connections. Eliminate what you can before looking at the inverters
On Sun, Jan 9, 2022, 11:36 AM Jeremy Rodriguez <[email protected]> wrote: > > > Hello > we have a lot of PAE series magnum inverters out there. > One client lately has been experiencing voltage drop and failure of PCBs > in two of his household appliances. I know it’s common to have some > dimming of the lights when a well pump or other large load kicks on, but > has anyone ran across a solution to alleviate the problem or boost up the > voltage / condition it, in any way ? > I’m not sure if this just happens with low battery voltage, or always > The inverter is located ~ 300 ft from the main electrical panel with > #2/2/2/4 URD feeders to an outdoor disco, then 8 AWG copper to the mains > panel. > 4448 PAE with one string of 6CS21P Batteries. > > > Jeremy Rodriguez > Solar Installation / Design Expert > All Solar, Inc. > 1453 M St > Penrose Colorado > > > > Sent by Jeremy's iPhone. Sorry for typos and shorthand! > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
