Long runs of URD direct buried?  Just a nick into the metal can corrode the cable all the way through over time.  We use conduit for almost everything anymore.  The savings with URD doesn't pan out, when you have to abandon the line after 10 years.

Ray Walters
Remote Solar
303 505-8760

On 1/9/22 5:10 PM, Jerry Shafer wrote:
I would look at connections first, lug that is not as tight as it ne we do to be, a breaker failing, outlets that are either push in wires or have loose connections. Eliminate what you can before looking at the inverters

On Sun, Jan 9, 2022, 11:36 AM Jeremy Rodriguez <allsolarjer...@msn.com> wrote:



    Hello
    we have a lot of PAE series magnum inverters out there.
    One client lately has been experiencing voltage drop and failure
    of PCBs in two of his household appliances.  I know it’s common
    to have some dimming of the lights when a well pump or other
    large load kicks on, but has anyone ran across a solution to
    alleviate the problem or boost up the voltage / condition it, in
    any way ?
    I’m not sure if this just happens with low battery voltage, or
    always
    The inverter is located ~ 300 ft from the main electrical panel
    with #2/2/2/4 URD feeders to an outdoor disco, then 8 AWG copper
    to the mains panel.
    4448 PAE with one string of 6CS21P Batteries.


    Jeremy Rodriguez
    Solar Installation / Design Expert
    All Solar, Inc.
    1453 M St
    Penrose Colorado


    Sent by Jeremy's iPhone. Sorry for typos and shorthand!
    _______________________________________________
    List sponsored by Redwood Alliance

    Pay optional member dues here: http://re-wrenches.org

    List Address: RE-wrenches@lists.re-wrenches.org

    Change listserver email address & settings:
    http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

    There are two list archives for searching. When one doesn't work,
    try the other:
    https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
    http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

    List rules & etiquette:
    http://www.re-wrenches.org/etiquette.htm

    Check out or update participant bios:
    http://www.members.re-wrenches.org


_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here:http://re-wrenches.org

List Address:RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to