That's concerning. We just added these to our product offerings. I reviewed the QCell installation manual for this product and there doesn't seem to be any guidance on the subject.
Are the DC leads tight enough when connected to the microinverter that they would not sag enough to touch the roof, or is the tape the only thing preventing the leads from touching the roof? Jason Szumlanski Florida Solar Design Group On Thu, Jun 2, 2022 at 9:37 AM Dave Tedeyan via RE-wrenches < [email protected]> wrote: > Hi All, > > I just got some of the Qcell 360w AC modules that have the Enphase > microinverter factory applied to the back. The module is the half cut cell > type with the DC leads coming from either side of the middle of the module. > The modules come with the wires taped to the back of the module. If you > remove that tape, there appears to be almost no way to properly manage > those wires. Is that tape meant to just keep the wire on the back of the > module forever? Would that even last more than a year? I am curious what > other people have done for these if they have used them or something > similar. Maybe if you get the rail in the right spot, the wires will just > sit on the rail... > > I realize that we have had a thread on wire management with half cut cell > modules before, but this is a little different, as I am specifically asking > about that tape and if anyone knows if it holds up over time. > > Cheers, > Dave > > -- > [image: Logo] <https://www.sungineersolar.com/> > Dave Tedeyan, P.E. > Owner | Sungineer Solar > p: he | him | his > a: 1653 Slaterville Rd. | Ithaca, NY 14850 > w: www.sungineersolar.com <http://www.sungineersolar.com/> > c: (607) 288-2898 > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
