I just got a quick look at them on the pallet when they arrived on site yesterday. We will be starting this installation next week, so I can report back with more details then. Cheers, Dave
On Thu, Jun 2, 2022 at 9:47 AM Jason Szumlanski via RE-wrenches < [email protected]> wrote: > That's concerning. We just added these to our product offerings. I > reviewed the QCell installation manual for this product and there doesn't > seem to be any guidance on the subject. > > Are the DC leads tight enough when connected to the microinverter that > they would not sag enough to touch the roof, or is the tape the only thing > preventing the leads from touching the roof? > > Jason Szumlanski > Florida Solar Design Group > > > > > On Thu, Jun 2, 2022 at 9:37 AM Dave Tedeyan via RE-wrenches < > [email protected]> wrote: > >> Hi All, >> >> I just got some of the Qcell 360w AC modules that have the Enphase >> microinverter factory applied to the back. The module is the half cut cell >> type with the DC leads coming from either side of the middle of the module. >> The modules come with the wires taped to the back of the module. If you >> remove that tape, there appears to be almost no way to properly manage >> those wires. Is that tape meant to just keep the wire on the back of the >> module forever? Would that even last more than a year? I am curious what >> other people have done for these if they have used them or something >> similar. Maybe if you get the rail in the right spot, the wires will just >> sit on the rail... >> >> I realize that we have had a thread on wire management with half cut cell >> modules before, but this is a little different, as I am specifically asking >> about that tape and if anyone knows if it holds up over time. >> >> Cheers, >> Dave >> >> -- >> [image: Logo] <https://www.sungineersolar.com/> >> Dave Tedeyan, P.E. >> Owner | Sungineer Solar >> p: he | him | his >> a: 1653 Slaterville Rd. | Ithaca, NY 14850 >> w: www.sungineersolar.com <http://www.sungineersolar.com/> >> c: (607) 288-2898 >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/[email protected]/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > -- [image: Logo] <https://www.sungineersolar.com/> Dave Tedeyan, P.E. Owner | Sungineer Solar p: he | him | his a: 1653 Slaterville Rd. | Ithaca, NY 14850 w: www.sungineersolar.com <http://www.sungineersolar.com/> c: (607) 288-2898
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
