I don’t agree about either the trace/xantrex SW or the newer Schneider SW or Outback fx not having a LBCO that will work with LFP.
The SW has a LBCO of between 16-32v.
Every LFP battery I’ve used the LBCO of all of those inverters is well within the parameters of LFP batteries.
I guess there are battereis im not familiar with that have a LBCO outside of those parameters. Jay
I've done a lot of Mate3s swaps over the years, as they are not the most reliable piece of equipment, and I never involved outback in it. If I recall, you just link the new mates mac ID to the plant in opticsRE, and delete the old one. Whether you lose all of the old data when doing that I can't remember -- probably so. Perhaps just name the old one old data, and keep it on the portal rather than deleting it, and use the new one going forwards.
Zeke
Subject: [RE-wrenches]
Message-ID:
<CAAgpqUO7J2g380v8VbE472C5U=rhD= [email protected]>
Content-Type: text/plain; charset="utf-8"
Friends:
I need to swap a Mate3s. This requires help from Outback. They are not
answering texts, emails or phone calls.
Is there any way one can make this swap without Outback?
|
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
