Outback VFXs that I have worked on, had an LBCO that topped out at 48 v,
definitely a problem. Magnum inverters LBCO topped at 49 v, more
usable, but still too low in my experience.
Ray Walters
Remote Solar
On 12/22/2025 2:58 PM, Jay via RE-wrenches wrote:
I don’t agree about either the trace/xantrex SW or the newer Schneider
SW or Outback fx not having a LBCO that will work with LFP.
The SW has a LBCO of between 16-32v.
Every LFP battery I’ve used the LBCO of all of those inverters is
well within the parameters of LFP batteries.
I guess there are battereis im not familiar with that have a LBCO
outside of those parameters.
Jay
On Dec 22, 2025, at 1:32 PM, Zeke Yewdall via RE-wrenches
<[email protected]> wrote:
I've done a lot of Mate3s swaps over the years, as they are not the
most reliable piece of equipment, and I never involved outback in
it. If I recall, you just link the new mates mac ID to the plant in
opticsRE, and delete the old one. Whether you lose all of the old
data when doing that I can't remember -- probably so. Perhaps just
name the old one old data, and keep it on the portal rather than
deleting it, and use the new one going forwards.
Zeke
Subject: [RE-wrenches]
Message-ID:
<CAAgpqUO7J2g380v8VbE472C5U=rhD=ke8-yyiw+_1onakco...@mail.gmail.com
<mailto:ke8-yyiw%[email protected]>>
Content-Type: text/plain; charset="utf-8"
Friends:
I need to swap a Mate3s. This requires help from Outback. They are not
answering texts, emails or phone calls.
Is there any way one can make this swap without Outback?
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try
the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here:http://re-wrenches.org
List Address:[email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
